The 750 system for ornate or antique gates, is a concealed operating system underground, complimenting the style of your gates, including the high strength hydraulic lock system ensuring the gates cannot be forced, giving you exceptional anti-intrusion security. With safety in mind, sensitive by-pass valves in the hydraulic system ensure the maximum anti-crushing safety, With a manual override facility in the event of an emergency.

This system is designed for gates or heavy doors having a maximum width of 7m (3.5m per leaf), and an opening angle of up to 180º, without changing the original appearance. Silent and Invisible, the 750 system consists of a Hydraulic drive unit (installed underground) with a Hydraulic pump unit ( installed above ground) connected by copper tubing, this system will operate gates weighing 800kgs.

The efficiency of the 750 system allows opening and closing manoeuvres at speeds ranging from 6 to 18 seconds, provides an extremely efficient security barrier which requires no additional locking, and is fully waterproof giving you less maintenance costs.

The 402 System

The 402 system designed for residential gates up to a maximum overall width of 3.6 metres for a double gate (1.8m each leaf). The 402 system is corrosive resistant and of a strong design, and features outstanding reliability and safety characteristics.

Systems that can be controlled by this control Panel.
· Swing gates
· Sliding gates
· Bi-Parting Sliding gates
· Barriers
· Road Blockers
· Rising Bollards
· Pedestrian gates
· Garage doors
· Roller shutters
· Electromechanical operators
· Electro-Hydraulic operators
· With or without limit switches
· Multi-voltage accessories
· Soft start-soft stop feature

The PSB 2000 control panel consists of a robust microprocessor using a PIC Processor chip giving you reliable functionality, this control panel is compatible with all other manufacturers ranges of automatic operators.

Advantages of this controller Easy to install and maintain. Less training required due to only one controller being installed. A multi-voltage output means all manufactures accessories can be added. All the load bearing components are replaceable. The Heavy duty electronic circuit board is designed to keep component numbers to a minimum.

Hinged gates for Southern water.

Control:
Card reader entry.
Free exit by induction loop.
A safety induction loop will prevent the gates closing when a vehicle is present.

Equipment:
1No. Pair of motorised hinged gates
1No. Card reader
1No. Card reader post
1No. Road sensing induction loops

Civil work:
Gate installation and card reader base.
Cable ducts to one post for the mains supply 240v 10A, Cable ducts across to other post. Cable duct to card reader post.

Note 1:
The induction loops indicated ' A' and 'B' are positioned in the road surface.
Type ' A '- To open the gates. (Free exit)
Type ' B '- To provide a safety and gate close feature.

INDUCTIVE LOOP INSTALLATION